Zynpyre

The Zynpyre Clean Chamber is a reusable cleaning system built to
make the classic ISO + salt cleaning method cleaner, easier, and more
controlled.

This system is designed specifically to clean your dirty pieces. The Bump Cap and silicone sleeve create a leak-proof compression seal. They also cushion impacts, allowing you to shake your piece inside, which speeds up the process and improves cleaning power.

Instead of using a plastic baggie or a random cup, the Clean Chamber gives you a sealed chamber designed for cleaning dirty pieces and
accessories. Add your piece, cleaning solution, and salt, then seal,
shake, drain, and rinse.

That's it.

Bump Cap

Small part. Big difference.

The Bump Cap is the flexible top disc used with the Zynpyre Clean Chamber.

It replaces the standard flat metal lid insert and works with the threaded retaining ring, silicone sleeve, and upper gasket lip to help create a more controlled cleaning chamber.

It is not just a lid.

It helps seal.
It helps cushion.
It helps drain.
It helps make the whole system work better.

Patent Pending.

What It Does

The Bump Cap is a flexible elastomeric cap disc designed for the top of the Clean Chamber.

When installed under the threaded retaining ring, it helps close the chamber during cleaning and creates a softer lid-side surface inside the system.

That matters because cleaning is not just about the solution.

It is about what happens while you shake or swirl.

The Clean Chamber is designed to keep the cleaning process contained, controlled, and easier to repeat. The Bump Cap is a key part of that system.

How It Seals

The Clean Chamber uses a protective silicone sleeve with an upper gasket lip at the top of the jar.

When the Bump Cap is placed under the threaded retaining ring and the ring is tightened, the flexible cap presses against the sleeve’s upper gasket lip.

That compression helps form the chamber’s top seal during normal use.

Instead of relying on a loose plastic bag, open cup, or random container, the Bump Cap works as part of the Clean Chamber’s sealed system.

Before shaking, always make sure the cap is seated correctly, the ring is tightened, and the chamber is checked for leaks.

How It Cushions

When a glass piece is being cleaned, movement happens.

Solution moves. Cleaning crystals move. The piece can shift during shaking or swirling.

A standard hard lid surface is not made with that movement in mind.

The Bump Cap creates a flexible lid-side surface inside the chamber, helping reduce hard contact at the top during controlled agitation.

Together with the protective silicone sleeve lining the chamber, the Bump Cap helps create a softer internal cleaning environment than a bare hard jar.

The goal is not violent shaking.

The goal is controlled movement that helps the cleaning solution and abrasive media do their job.

How It Helps Drain

After cleaning, the Bump Cap can also help make draining more controlled.

Instead of fully opening the chamber and immediately exposing the dirty solution, the Bump Cap may be used as a partial cover while the used solution drains through a controlled gap.

This helps keep the cleaned piece and larger contents inside the chamber while the dirty solution is poured out carefully.

It is a simple improvement, but it helps solve one of the most annoying parts of cleaning: the messy transfer between cleaning and rinsing.

Drain carefully. Rinse thoroughly. Do not store dirty solution in the chamber.

Why It Matters

The old cleaning method worked.

The problem was the process around it.

Plastic bags leak. Cups spill. Random containers are not built for shaking, sealing, cushioning, or draining.

The Bump Cap helps turn that improvised routine into a real system.

It works with the silicone sleeve, threaded retaining ring, and rigid jar to help make the Clean Chamber cleaner, easier, and more controlled from start to finish.

Same cleaning method people already trust.

A better chamber around it.

No bag. No mess. No hassle.

Zynpyre Clean Chamber — Patent Pending.

As a general rule of thumb use at least half a cup of solution. For pipes, you want enough solution in the chamber to reach above the carb hole.

For smaller pieces such as removable vape pieces, you may not need quite as much.

It is better to have too much solution than not enough.

The Clean Chamber is designed for small glass pieces and removable vape and bong accessories that fit safely inside the chamber.

It may work well for:

Removable vaporizer glass parts and components

Hand pipes, spoon pipes, hammer pipes

Bong bowl pieces

Slides

Downstems

Adapters

Small glass accessories like beads

Always make sure the piece fits inside the chamber without forcing it.

If it fits comfortably and is compatible with liquid cleaning, it may be a good fit for the Clean Chamber.

Yes. The Clean Chamber is designed to be reused over and over again.

After each cleaning, drain the used solution, rinse the chamber thoroughly, and allow components to dry before storage.

The sleeve is made from platinum-cured silicone and is designed to be easy to rinse after normal cleaning.

The Clean Chamber is designed to seal during normal use when assembled
correctly.

The upper gasket lip, and the Bump Cap create a leak-free compression seal when the lid is screwed tight.

Before shaking, always make sure the cap and ring are seated properly and
tightened securely.

Do not overfill the chamber.

The Clean Chamber sleeve is made from smooth, non-porous platinum silicone, which helps prevent resin from bonding to the surface during normal use.

During cleaning, the alcohol-based solution acts as a solvent. It thins and loosens the resin from the dirty glass piece, keeping that residue suspended in the liquid instead of letting it smear and stick to the sleeve.

After cleaning, simply drain the used solution and rinse the chamber thoroughly. Any loose residue on the sleeve should rinse away easily as part of normal cleanup.

Plastic baggies work until they dont.

They can leak, tear, make draining awkward, and leave you
dealing with resin, dirty solution, and a floppy bag in the sink.

Zynpyre gives you a more stable, reusable, sealed cleaning chamber so the
process feels cleaner and more controlled from start to finish.